Hechinger Quartz Clock Movements

Quality Clock Movements from a top German manufacturer at very reasonable prices

We stock a large range of clock movements from this well-known German manufacturer. Hechinger movements are quality quartz movements, and can be used as replacement movements, or when building your own clock from scratch. (See our clock project page for ideas).

Many products on this page are available at AGTshop. Order Quartz movements Online now...

For an overview of our full range of clock parts, have a look at our Clock Movement and Materials catalogue pages or our Clock parts Introduction page

Standard Quartz Movements	Quartz Insertion Battery Movements	Miniature Insertion Movements
Quartz High Torque Movement	Mini Quartz Movement	Quartz Reverse Movement
Pendulum Quartz Movement	Chime Quartz Movement	Radio Controlled Quartz Movement

For Quality and Value Hechinger Standard Quartz Movements are Unbeatable

u	Easy installation (uses single centre fixing nut)
u	Hands can be set from front or rear.
u	With or without centre seconds
u	Two year guarantee
u	Integral Hanging Bracket
u	Battery life (using Rayovac) approx. 1-2 years.
u	Supplied complete with fittings (see below)
u	Available in three spindle lengths

M419 - 10.8mm spindle length 0.50mm - 3.00mm Dial/Case

M420 - 17.2mm spindle length
4.00mm - 7.50mm Dial/Case

M421 - 22.5mm spindle length
8.00mm - 11.00mm Dial/Case

Dial/Case Thickness shown is minimum to maximum using either a 1mm or 3mm rubber washer and standard centre fixing nut.
Hole Size Diameter. Requires 10mm hole in case/dial to accept centre fixing nut.
Battery - Rayovac 815 (AA) not included

Fittings Available:- Brass Centre Fixing Nuts. 4mm - 6mm - 8mm - 10mm - 12mm - 17mm Hand Retaining Nuts. Gilt Bored - Gilt Solid - Black Bored - Black Solid (Use bored when using a C/S Hand) Rubber Washers. 1mm - 3mm Plastic Washer for Centre fixing nut. Fittings supplied as standard are as follows: M419 4mm Brass centre fixing nut - Brass hand retaining nut bored - Plastic washer - 1mm Rubber washer M420 8mm Brass centre fixing nut - Brass hand retaining nut bored - Plastic washer - 1mm Rubber washer M421 12mm Brass centre fixing nut - Brass hand retaining nut bored - Plastic washer - 1mm Rubber washer If different fittings to standard are required - Please state when ordering

Need a hand Clock Hands	We stock other clock parts as well. Pick a particular design of clock hands, or get a discount by ordering our pack of popular hands. This contains 10 pairs of hands + 6 C/S hands (all metal)
Clock parts and materials Catalogue	Check out this free catalogue to see the range of hands, bezels (clock faces), pendulums etc.

FOR THE BEST QUARTZ CLOCK MOVEMENT OFFERS.

COME STRAIGHT TO AGTHOMAS

Phone now for more details - 01274 497171

or check our catalogue page

Hechinger Quartz Insertion Battery Movements

Hechinger insertion movements are complete clocks ready to mount in any case with a hole diameter between 56mm and 63mm. When inserted they are held in position by four spring clips. There are four dial designs and three bezel diameters available, one model is available with alarm. See illustrations below. Battery required: Rayovac 810 (LR01)
Polished brass finish bezel with top bevel, white dial with black Roman numerals, centre seconds. Available in three bezel diameters. M252 65mm M247 65mm with alarm M389 72mm M249 85mm
Polished brass finish bezel with top bevel, gold dial with black Roman numerals, centre seconds. Available in three bezel diameters. M245 65mm M388 72mm M253 85mm
Polished brass finish bezel with top bevel, white dial with black Arabic numbers, centre seconds. Available in three bezel diameters. M284 65mm M285 85mm M425 72mm
Polished brass finish bezel with top bevel. antique gold finish dial with black Roman numerals on white plaques, centre seconds. Available in two bezel diameters. M246 65mm M248 85mm

Hechinger Miniature Insertion Movements

Hechinger miniature insertion movements are a range of high quality clock movements which look superb mounted in metal, wood, ceramics, glass and slate cases etc. The perfect insertion movement for quality products. All movements are supplied without a battery.
Quartz movement, 23mm diameter bezel plastic gold plated, white dial with black Roman numerals, centre seconds. Fixing hole diameter 22.7mm depth 6mm held by clips built into case. M412 23mm W50.1 movement.
Quartz movement, 33mm diameter bezel brass gold plated, white dial with black Roman numerals, centre seconds. Fixing hole diameter 32mm depth 6mm held by flexible plastic ring. M413 33mm W53.1 movement

Many products on this page are available at AGTshop. Order Quartz movements Online now...

	Home \| Product List \| AGT Catalogues \| Terms & Conditions \| download an Order Form \| Contact Us © Copyright 2001-2008 AGThomas Ltd. email AGThomas \| email the webmaster
A G Thomas (Bradford) Ltd., Tompion House, Heaton Road, BRADFORD, BD8 8RB, United Kingdom.