CALYPSO Waterproof Tester

Watch Repairers:

If watch repairs are a regular part of your business you should consider one of these. More and more quality watches are waterproof - and the customer will want to know that the watch is still waterproof after a repair.

Use this wet test after any watch repairs to ensure water tightness.
It will give you, and your customer, complete confidence.

Take a closer look at this machine. Calypso price

Instructions for use

• Fill the cylinder with water up to the red line.
• Hang the watch on the hook, out of the water and screw on the lid tightly.
• Be sure that the hook is in the position completely out of the water. (Picture 1)
• Turn fully the air-releasing valve (a)
• Increase pressure with the lever, pumping up to any given pressure (1, 2, 3, 4, 5, 6, etc) atmospheres, corresponding to water pressure at 10, 20, 30, 40, 50 60, metres depth) (Picture 2)
• Immerse the watch into the water, pushing down completely the knob of the central stem. (Picture 3)
• Release air pressure gradually by turning the valve (a)
• If the watch is not perfectly water-tight series of bubbles will emerge where the water tightness is incomplete (e.g. round the crown, glass, back of the case).
• Please note some bubbles may also appear on the external turning bezel, or the crown – even on the best waterproof watch – this is not a defect, but a little residual external air.
• Take out the watch before the indicator reaches zero.

W426 Calypso Waterproof Tester £330.00 ea

Prices quoted are before Carriage and VAT charges